How to Determine If You Need to Replace Your Electric Scrubber's Cleaning Brushes and How to Replace

The cleaning value of the fully automatic washing machine is mainly reflected in its cleaning method and cleaning efficiency. Fully automatic floor scrubbers are special equipment specially designed for hard floor cleaning. There are many sizes and models, especially suitable for large areas. Site cleaning operations.

After the electric washing machine is used for a long time, the related accessories will inevitably be worn to a certain extent, especially the main part to be cleaned is relatively large. In order to make the washing machine work normally, it is necessary to replace the cleaning accessories of the washing machine to ensure the cleaning effect of the washing machine. The replacement of the main part of the cleaning of the electric floor scrubber is the cleaning brush. How can I tell if the cleaning brush needs to be replaced, and how? When the wear marks of the main brush are larger than 5cm, it will affect the normal operation, and the spare parts will become hot during use.

At this point, the cleaning brush must be replaced. When changing, gloves must be worn to prevent cuts from burrs. 1. Unscrew the screw, remove the connecting rod, then remove the inner panel 2. Pull out the cleaning brush 3. Take out the cleaning port, then reinstall the replacement cleaning brush on both ends 4. Loosen the screw, then remove the side brush. 5. After installing all the components, adjust the height of the side brush appropriately. After Z, adjust the nut to lower the side brush to the correct position.